This is the factory replacement screen located on the outside lower center of your transom wall. This part helps filter out grass a debris from being pumped into your livewell.

This filter screen can be found in the bottom of the inside of your Bullet livewell. This screen helps cut down on the introduction of trash and grass into your Bullet livewell. Remember to order 2, you have one on each side.

This is the replacement insert located on the rear passenger side. This is where your aerator pumps the water out of the Bullet livewell. We also have the new style chrome insert available if you type "chrome livewell" in the search bar at the top of the screen.

This is the replacement insert located on the rear driver's side. This is where your bilge pumps the water out of the boat. We also have the new style chrome insert available if you type "chrome bilge" in the search bar at the top of the screen.

This is the replacement drain insert for the splash well overflow.

This is the  chrome replacement insert located on the rear driver's side. This is where your bilge pumps the water out of the boat. We also have the older style black insert available if you type "black bilge" into the search bar at the top of your screen.

This is the replacement insert located on the rear passenger side. This is where your aerator pumps the water out of the Bullet livewell. We also have the old style black insert available if you type "black livewell" in the search bar at the top of the screen.

This LED Livewell light is designed to be submerged an flush mounted on the inside wall of your Bullet livewell, Purchase 2 for maximum efficiency in your divided livewell. Hardwire to your auxiliary switch panel at the helm and use silicone when installing to prevent leaks.

This is the tube inside your livewell that fills the livewell up with water.

This Flow-Rite Aerator Spray Valve is an exact replacement for all of our newer Bullet boats or the perfect upgrade if your boat has the old style hose system.

This high quality waterproof livewell timer is a must have to provide quality fish care in your Bullet livewell. Works with your pre-exsisting timer switch to provide aeration increments every 2, 4, or 6 minutes.

This more powerful 800Gph Pump replaces both the Aerator and the Fill / Pump-out aspects of your Bullet livewell system. Your boat will have 2 pumps and you will have to pull the fuel tank to replace them. One pump is located at the bottom of the transom wall and the other is located under the fuel tank near the livewell wall. If you have any questions please do not hesitate to call us at Bullet Boats 865-577-7055.

The perfect replacement for your Bullet Boat. The Sahara automatic bilge pump has everything contained in one compact yet durable package – pump, wire, seals, strainer, and mercury-free switch –and installs quickly and easily in tight spaces. Pumps include 36” lengths of 16-gauge caulked and tinned copper wire. The Sahara S1100 has plenty of pumping power for most jobs. 1100 GPH* at open flow, 350 GPH* at 3.3’ head. Draws only 1.5-amps at open flow!

*Listed GPH is measured at design voltage of 13.6 VDC

This is the replacement divider located in the center of your Bullet livewell. We recommend that you silicone this piece in place after you snap it into the grove in the middle of your livewell, to prevent it from popping out when running over wakes. Please select your boat from the choices below.